Case 650M

Productivity

Strength and smarts combine to give the 650M greater performance from first cut to fine grading. A 74 horsepower engine delivers increased drawbar pull of 39,086 lbs. The hydrostatic drive system provides responsive control you can feel and a robust, box-style C-frame better supports heavy blade forces. Adjustable shuttle settings, combined with an advanced load management system that automatically adjusts track speed as load levels change, give you the pushing power you need at any speed. And beneath it all is a ruggedly redesigned undercarriage, available with three track configurations (including our exclusive 20-inch Wide Track), all of which come standard with clipped grousers for better turning. 

Fuel Efficiency

The 650M features a maintenance-free, Tier 4 Final FPT engine that uses Diesel Oxidation Catalyst (DOC) technology. This delivers maximum horsepower and torque with no regeneration required, no after-treatment filters to replace and no new fluids to add. 

Comfort and Visibility

Not only does the redesigned undercarriage help with performance, it also helps reduce noise and vibration within the cab. Improved seating, ergonomic joystick steering and other standard features such as environmental controls and a radio also help to keep operators comfortably in control. And thanks to smaller idlers, a sloped hood and a cab-forward M Series design, there’s excellent visibility all around the blade and ahead of the machine. 

Serviceability

An improved undercarriage design with robust components, heavy-duty SALT tracks, and optional Max Life bushings help extend the life of your machine. And all daily service checkpoints – including hydraulic components, filters and electrical components – are accessible from the ground without the need for any tools. 

Operator Environment

• Optional ROPS cab
• Single lever control for speed, steering and direction
• Forward/reverse speed ratio selector
• Adjustable armrests
• Foot rests; Retractable seat belt, 2 in (51 mm)
• Rear view mirror
• Seat tilts for access
• Warning Lights: Air filter; Alternator; Engine oil pressure; Diagnostic fault indicator; Engine coolant; temperature; Engine oil pressure; Low fuel level; Park brake engaged; Service soon indicator; Transmission temperature; Hi range; Hydraulic filter; Transmission filter; Transmission pressure.
• Gauges: Battery voltage; Fuel level; Digital hourmeter/tachometer/diagnostics/service reminder; Transmission oil temperature; Water temperature. *Audible warnings: Engine oil pressure; Transmission pressure; Engine coolant temperature; Low fuel level; Transmission charge pressure; Transmission/hydraulic temperature.

Engine

• FPT F5C F5HFL463D*G003
• Tier 4 Final Certified
• Automatic fan belt tensioner
• Integral engine oil cooling
• Fuel filter
• Dual element radial seal air cleaner
• 120 amp alternator
• 925 CCA 12-volt battery
• Engine side panel
• Anti-freeze to -34°F
• Pusher fan
• Radiator – Anti-sandblast

Drivetrain

• Dual path infinitely variable, single-lever controlled hydrostatic drive with electronic straight tracking & counter-rotation
• Final drive: Triple reduction; helical gear/planetary decelerator with hydrostatic drive retardation
• Decelerator with hydrostatic drive retardation
• Automatic spring-applied parking brake
• 10 incremental speed settings - Operator preference settings for max speed, shuttle sensitivity and steering sensitivity

Blade

• 52° – 60° variable pitch
• Single lever control for blade lift, angle and tilt
• 90 in (2.29 m) blade 650M LT
• 96 in (2.44 m) blade 650M LT/WT
• 109 in (2.8 m) blade 650M WT
• 120 in (3.0 m) blade 650M LGP

Undercarriage

• Hydraulic track adjusters
• Easy clean track covers
• Case sealed and lubricated track chain
• Permanently lubricated track and carrier rollers
• H.D. track covers
• Track adjuster guard
• Track gauge – 56 in or 68 in
• Track guides – front and rear
• Length of track on ground – 85 in
• High visibility track idler
• Heavy duty track frame, sprocket and mounting pads

Other

• Anti-vandalism package
• Backup alarm
• Hinged grill
• Decelerator
• Final drive seal guard
• Hand throttle
• Horn
• Work lights: 2 front/1 rear
• Master disconnect switch
• Mirror
• Operator’s manual enclosure
• O-ring face seal hydraulic fittings
• Pre-cleaner
• Vertical spin-on hydraulic/filters
• Hydraulics – 3 spool valve
• Fuse circuit protection
• Single key start switch
• Pre-wired for work lights
• Two additional power sources availabe for heater, air seat or auxiliary 12 volt power port
• Crankcase
• Transmission bottom
• CASE ProCare – 3-yr/3000-hr factory warranty, planned maintenance and SiteWatch™ Telematics