Case 586H

Productivity

The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. No need to worry about your load, CASE offers maximum travel capabilities with their 60° of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it, the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments.

Fuel Efficiency

These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Diesel Oxidation Catalyst (DOC) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.

Comfort and Visibility

Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain.

Serviceability

From tool-free swing-out access doors and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep.

ENGINE

• FPT 3.4 L Diesel
• Cooled EGR
• Diesel Oxidation Catalyst
• Full flow engine oil filter
• Air cleaner: Replaceable dry type with radial seal, Particulate filter
• Radiator with de-aeration bottle
• Antifreeze to -34°F (-37°C)
• Foot throttle
• Self adjusting belt

MAST

• 15 ft Std. Mast 1,863 lb (845 kg)
• 22 ft Std. Mast 2,608 lb (1 183 kg)
• 16 ft Freelift Mast 2,188 lb (993 kg

HYDRAULICS

• Gear pump – 18 gal/min @ 3,000 psi (68 L/min @ 207 bar)
• Heavy-duty hydraulic oil cooler
• 7 micron, spin-on oil filter

DRIVETRAIN

• Front axle, as selected:
• 2/4WD heavy-duty outboard planetary drive, with 19.5 L x 24 tires
• Rear axle: 2WD heavy-duty front axle with 11 L x 16 tires, 4WD heavy-duty mechanically driven rear axle, with 12 L x 16.5 tires
• 4F-4R Power Shuttle Synchromesh Transmission
• Torque converter
• On-the-Go electric 4WD control
• Electric F/R shuttle control
• Electric differential lock control, with push-button activation
• Park brake, spring applied, hydraulic release

OTHER

• Swing out side panel engine access
• Front/rear tie downs
• Reflective logos
• Canopy only: 2 front driving lights, 2 rear halogen work lights

OPERATOR ENVIRONMENT

• ROPS/FOPS certified protective canopy
• 2 halogen headlights
• 2 rear halogen work lights
• Wide walk through platform
• Vinyl seat
• 2 in (51 mm) seat belt
• Molded front fenders
• Gauges: Hour meter, Engine RPM, Engine coolant temperature, Transmission oil temperature, Job timer, Fuel level
• Warning lights: Air cleaner restriction, Alternator, Cold start, Engine oil pressure, Hydraulic oil filter bypass, Parking brake engagement, Engine coolant temp, Battery voltage
• Audible alarms: Coolant temperature, Engine oil pressure, Parking brake engagement, Converter oil temperature, Backup, Horn