Case SR130

Productivity

With enhancements in engine power, torque and auxiliary hydraulics, the CASE SR130 is perfect for smaller construction and agricultural applications. The new Tier 4 engine delivers a 10% increase in power and can be equipped with optional counterweights that increase its rated operating capacity by 100 lbs.

Fuel Efficiency

The large 16 gallon (60.5L) fuel tank can run all day without refueling because of new CEGR technology which helps boost productivity and fuel efficiency while meeting new Tier 4 emissions regulations.

Comfort and Visibility

The SR130 was engineered to work in smaller places without sacrificing operator comfort. The newly updated cab door along with a 360° view further improves visibility.

Serviceability

CASE skid steer loaders have been known for their impeccable serviceability. The SR130 loader makes maintenance effortless with service checks easily accessible through the rear of the machine.

ENGINE

• ISM N844L-F diesel
• 135.2 CID (2.2 L) Naturally Aspirated
• Tier 4 Final Certified
• Spark Arresting Diesel Particulate Filter (DPF) muffler
• Charged Air Cooler (CAC)
• Indirect fuel injection
• Horsepower: Gross: 48.8 hp (36.4 kW), Net: 45.8 hp (34.1 kW), Peak torque: 105.5 lb·ft (143 N·m)
• 120 amp alternator
• Dual element air cleaner
• Organic Acid Technology (OAT)
• Anti-freeze solution to -34º F
• Fuel tank - 16 gal (U.S.)
• Over and under radiator and oil cooler
• Single plane, top and bottom oil cooler/radiator configuration
• Glow plugs
• Integral engine oil cooler
• Fuel filter with water trap
• 925 CCA 12V battery
• Master electrical disconnect

DRIVETRAIN

• 1-speed hydrostatic four wheel drive
• ASA #80 drive chain
• SAHR disc parking brake

HYDRAULICS

• Auxiliary hydraulics: @ 3,050 psi (210 bar) – 17.5 gpm (66.2 L/min)
• 6 micron oil filtration system
• 3-spool loader control valve
• Auxiliary hydraulic disconnects, ISO flat-face – connect-under-pressure with case drain
• Hydraulic circuit pedal lock
• Auxiliary function lockout override
• Loader lift lockout override
• Heavy-duty hydraulic oil cooler
• Loader arm float position
• Loader function lockout system

OPERATOR ENVIRONMENT

• ROPS/FOPS Level 1 canopy w/ side screens
• Keyed start ignition
• Tilt ROPS/FOPS; Rear window w/ emergency escape
• Suspension Seat, vinyl w/ 2 in (51 mm) retractable 3 point lap seat belt
• Hand and foot throttle
• Alarm package – back-up and horn
• Headliner
• Dome Light
• Top window
• Cup holder
• 12V Power plug socket
• Foot rest
• Seat pocket
• Padded seat bar w/ integral armrests
• Loader control lockout system
• Electric parking brake control
• Operator’s compartment floor cleanout
• Proportional auxiliary hydraulic control – on joystick
• Advanced Instrument Cluster w/: Digital hour meter, Tachometer, Fuel level LCD bar graph w/ alarm, Diagnostic features, Security lockout
• Warning lights with alarms: Engine coolant temperature, Engine oil pressure, Engine malfunction, Hydraulic charge pressure, Hydraulic filter restriction
• Hydraulic oil temperature: Critical system stop, Engine system, Hydraulic system, Electrical and diagnostic system
• Warning alarms: Battery voltage – plus display, Oil service
• Indicator light: Engine preheat, Parking brake, Seat bar reminder

LOADER

• Manual attachment coupler
• Radial lift geometry
• Loader lift arm support strut
• SAE operating load: 1,300 lbs
• Tipping load: 2,600 lbs

TIRES

• 10 X 16.5 Heavy duty - 59 inch
• Over-the-Tire Width (OTW)
• Galaxy XD2002

OTHER STANDARD FEATURES

• Halogen lights - 2 front, 2 side, 2 rear flood
• Heavy duty front lights
• Pre-wired for rotating beacon
• Lockable service access hood
• Single-point daily service
• Rear tail lights
• Remote oil drain
• Remote oil and fuel filters
• Block heater
• Debris ingression sealing
• Mounting points for add-on counterweights