Mowers LZS80TDYM724W0
Features
Specifications
Equipment | |
blades Spindles | No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
Drive Tires | 26x12-12, 6ply Multi Trac® |
Cup Holder | Standard |
Tractor Frame | Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel. |
Steering Control | Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness. |
Front Caster Tires | 15 x 6.0-6, smooth-tread, semi-pneumatic. |
Parking Brake | Lever-actuated internal wet disc brake. |
Seat | Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up. |
Electrical | 12-volt battery with 55-amp alternator. |
Power Components | |
Engine Brand | Yanmar |
Engine Model | 3TNV80FT |
Engine Displacement | 1,267 |
Engine Series | TNV |
Engine Type | Electronically Governed IDI Turbo Diesel |
Engine Speed | 2,600 RPM |
Air Filter | Heavy-duty canister air filtration system with electronic vacuum sensor |
Fuel Type | Diesel |
Fuel Capacity | 12-gallon (45.4-L), side fuel tanks |
Fuel Indicator | Yes - mechanical float type |
Drive | Hydro-Drive |
Drive Description | Kanzaki KPS-18T Transmission, 15-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-H motors, hydraulic oil cooler. |
Speed | Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse. |
Carb Compliant | Yes |
Deck Lift | Hydraulic |
Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS | 2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement | Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft |
Drive Wheel Release | Allows unit movement without engine running. |
Casters | .50" thick caster yoke arms. |
Decks | |
Width / Cutting Deck | 72" |
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight. |
Blade Tip Speed | Approximately 17,900 fpm |
Cutting Heights | 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. |
Blades | 3 Blades at 24.50" Length |
Dimensions | |
Width | 84.9 in. (215.6 cm) |
Length | 99.6 in. (253.0 cm) |
Height | 72.5 in. (244.6 cm) |
Curb Weight | 1930 |