McKeel Equipment, Kentucky
CASE IH
CASE CE
kubota
McKeel Equipment, Kentucky
Paducah
(270) 444-0110
1939 North 8th Street
Paducah, KY 42001
Call Us
Directions
Murray
(270) 753-3062
3724 US Highway 641 South
Murray, KY 42071
Call Us
Directions

Seedbed Preparation 7330DH

New Products / Great Plains / Seedbed Preparation / Conventional Tillage / Disk Harrow / 7330DH

Double tap to zoom

 

Features

SPRING-OFFSET C-SHANKS

Offset C-shanks cushion the gangs and protect the unit. The offset design maximizes the clearance between the disc blades to help prevent plugging.

SPRING-LOADED SCRAPERS

Standard scrapers are spring loaded; quickly make them rigid by tightening a bolt.

SpeedBlade™

With a 5% faster turning speed than regular concavity blades, the exclusive SpeedBlade™ aggressively powers through heavy residue and thoroughly mixes soil at higher speeds without ridging. This self-sharpening serrated blade works like a regular notched blade, but its shallower blade cutout allows for shallower working depth. Unlike competitive blades, the low-concavity SpeedBlade stays sharper longer and maintains its shape as it wears. With more blade surface, the SpeedBlade wears better and last longer than blades with larger notches.

INCREASED TIRE AND HUB CAPACITY

All transport tires are radial tires and carry loads at 73 psi. Units also feature 8-bolt hubs on center and wings, with up to 8000-pound capacity for improved reliability.

IMPROVED GROUND CLEARANCE

Transport clearance of 13" allows for 24" or 26" diameter blade options, and a low-profile, t-style hitch tightens the turning radius in the field. Hydraulic gauge wheels, which actively raise and lower with main lift wheels, have also been added to the outside wings on larger units.

IMPROVED GANG BARS

Stronger 4" x 6" gang bars have polygon bushings and hardened pins for greaseless hinge points. Four bolt attachment plates and cradle gussets relieve stress on gang tubes.

HYDRAULIC GAUGE WHEELS

Eliminates the need to adjust gauge wheels when depth is changed. Eliminates gouging and wing hop. (29', 33', and 36' models only)

Heavy, Ductile Cast Spools

Our heavy, ductile cast spools each weigh 23.55 lbs., while welded spools used by competitors weigh only 11.01 lbs. each. Putting weight “in” the gang versus “over” the gang increases reliability in the C-shank and bearings. Nuts on each end of the disk gangs provide easy, quick maintenance.

Exclusive Maintenance-Free Bearings

Reduce maintenance time and extend life of bearings. These 360° self-aligning bearings are never sideloaded. A six-lip seal on each side locks in grease and prevents contamination. Additionally, the walking beam pivots utilize Teflon™-coated bushings, eliminating the need for tapered bearings and grease in pivot points.

DOUBLE OFFSET

Design ensures complete center cutout and eliminates the need for a middle breaker.

Specifications

MODEL 7330DH
NO. OF BLADES (9") 86
NO. OF BLADES (7.5") 102
TRANSPORT TIRES 380/55R16.5 (4)
WING TIRES 12.5Lx15 (4)
WEIGHT (approx lbs) 18,000
PTO H.P. REQ (min) 210+
DIMENSIONS  
TILLAGE WIDTH 30' 2"
WIDTH (transport) 18' 2"
HEIGHT (transport) 12' 8"
TILLAGE INFO  
CENTER SECTION 13' 6"
1ST SECTION 7' 6"