Kuhn TDH 8315-22

Disc Gangs

The KUHN Krause 8315 tandem disc harrow offers a choice between 24’’ or 26’’, ¼’’ thick Residue Razor™ disc blades spaced 9’’ or 10’’ apart on the front gang and 10’’ apart on the rear gang. Heavy-duty, ductile iron spools with a 7” diameter bell multiply the strength of the gang. The 22-degree gang angle on the front and 19-degree gang angle on the rear allow for optimum residue cutting and mixing in primary tillage conditions.

Residue Razor™ disc blades are engineered to provide long wear life and sharpness - up to 5 times sharper than conventional blades.

Single-Point Depth Control

Adjust working depth across the entire disc from a single location with just one convenient crank at the front of the disc. Fine tune depth using the indicator decal - five turns changes the operating depth by one inch. Return to the same depth after each pass or change depth in the field in a matter of seconds.

Walking Tandems

Standard on all KUHN Krause 8315 disc harrows, heavy-duty walking beams with new metric tires allow for consistent working depth on rough ground and more stable road transport. Walking beams have slip-in spindles and heavy-duty hubs. Walking beam pivots require no daily grease maintenance or adjustment for preload.

No Daily Grease Maintenance

PEER^® TillXtreme^™ bearings, incorporated into disc gang assemblies, require no daily grease maintenance. An exclusive, KUHN Krause two-piece, nylon outer ring absorbs shock loads and helps center the bearing within the housing, preventing bearing preload and premature failure of the disc gang bearing.