Rhino HDGS96
Double tap to zoom
Grading Scraper HDGS96
Overview:
Return your driveway or roadway to like new condition.
The Rhino grading scraper cuts material from high spots and deposits it in the low spots, leveling the surface. Available in widths of 60", 72", and 84", this scraper will fit your needs with a minimum number of passes over the surface.
Designed for economical use, the grading scraper only requires 30-50 HP, depending on model. Additionally, heat treated shanks with replaceable hardened tips that can rip down 2-3/8" are standard on every Rhino Grading Scraper!
The offset angled blades use 1/2" x 6" cutting edges that are reversible and replaceable for long life, and the 13-3/4" tall side panels allow for large volume movement of loose material. Full length replaceable wear skids are standard for long life in tough conditions!
- Less
Return your driveway or roadway to like new condition.
The Rhino grading scraper cuts material from high spots and deposits it in the low spots, leveling the surface. Available in widths of 60", 72", and 84", this scraper will fit your needs with a minimum number of passes over the surface.
Designed for economica... + Read More
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Share This Product:
Features
- Smooths Gravel Driveways, Roadways, and Parking Lots Moving Material from High Spots to Low.
- Two Replaceable, Offset Angle Blades for Longer Life.
- CAT 1 Quick Hitch Compatible.
- Tall Side Panels Move Lots of Material Without Leaving Spillage.
Specifications
Model | HDGS96 |
Hitch | CAT 1 & CAT 2 QH |
Working Width | 96'' |
Overall Width | 102'' |
Overall Height | 34 7/16'' |
Overall Length | 54 7/16'' |
Box Height | 15 7/8'' |
Side Panel Thickness | 3/16'' |
Front Frame Beam | 4'' x 4'' x 3/8'' Wall |
Rear Frame Beam | 4'' x 4'' x 1/4'' Wall |
Skid Shoe | 1/2'' x 2- 1/2 x 52'' long |
Scarifier Shanks | 3/4'' x 2-1/2'' x 19 1/8'' 4 holes, Heat Treated Plow Point |
Number of Shanks | 8 |
Cutting Edge | 1/2'' x 6'' bolt-on,replaceable,reversible heat treated |
Cutting Edge Angle | 6 Degrees |
Cutting Edge Spacing | 20 5/16'' |
Tractor HP | 90 - 2WD 72 - 4 WD |
Approximate Weight (lbs) | 828 |